The glass bottle spraying production line is generally composed of spray room, suspension chain and oven. Glass bottles and the former water treatment, glass bottles need to pay special attention to the problem of sewage discharge. As for the quality of the glass bottle spraying, it is related to the water treatment, the surface cleaning of the workpiece, the electrical conductivity of the hook, the size of the gas, the amount of powder spray, and the level of the operator. You are advised to select the following method for trial: Pre-processing segment

The pre-treatment section of glass bottle spraying includes pre-stripping, main stripping, table adjustment, etc. If it is in the north, the temperature of the main stripping part can not be too low, and it needs to be insulated. Otherwise the treatment effect is not ideal;

Preheating section

After pre-treatment, it is necessary to enter the preheating section, which generally takes 8 to 10 minutes, and the glass bottle is best to make the sprayed workpiece have a certain residual heat when arriving at the powder chamber to increase the adhesion of the powder;